Replacing the LCD Bezel
1. Place the bezel on top the LCD panel and then press the bezel on all sides until it snaps
into place.
NOTE:
NOTE:
Make sure that the LCD, camera board, microphone and antenna cables are properly
routed on the hinge sides and there is no gap between the bezel and the LCD cover.
Figure 3-91. LCD Bezel
2. Secure the bezel with the two screws.
Figure 3-92. LCD Bezel Screws
Table 3-24. Screws
Step
LCD Bezel Assembly
62
Screw
M2.5 × L4
Quantity
Screw Type
2
Machine Maintenance
0