Sony Trimaster EL PVM-2541 Operating Instructions Manual page 46

Gamma adjustment function
You can select the gamma mode from among 2.4, 2.2,
and CRT.
Selecting marker/scan display
Various items for broadcast use can be displayed. The
center marker, safe area marker, aspect marker or
display size (scan), etc., are displayed by selecting
according to use.
For more information, see MARKER SETTING on
page 63, and see SCAN of FUNCTION BUTTON
SETTING on page 65.
Scan setting/native display
When video signals are input, you can set the display
size to 0% scan (normal) or 5% over scan (over).
A native display function that maps the pixel of the
signal to the panel in one-to-one mode is also equipped.
Scaling to correct the screen aspect ratio is done to the
horizontal direction of SD signals with non-square
pixels (number of horizontal pixels of the signal system
is 720 or 1440) or 640 × 480 SD signal of HDMI video.
Key inhibit function
You can inhibit a key function to prevent missing an
operation.
Illuminated control panel
The characters that represent the names of the buttons on
the control panel can be illuminated, so it is visible in the
dark. The brightness of the LED has two levels, and
varies according to the ambient light.
Screen saver
To reduce burn-in, the brightness of the screen can be
automatically decreased when a still image is displayed
for more than 10 minutes.
Rack mount
PVM-2541 and PVM-1741 support the VESA (100 ×
100) standard. The PVM-1741 can also be mounted on
an EIA-standard 19-inch rack.
For more information, see "Installing on a Rack (PVM-
1741 only)" on page 52.
Consult with Sony qualified personnel for wall mount
installation.
Monitor stand with tilt function
PVM-2541 and PVM-1741 can be mounted on the
optional SU-561 Monitor Stand with tilt and height
adjustment. You can select the height of the monitor by
adjusting the stand.
For more information, see "Adjusting the Height of the
Monitor (with SU-561 only)" on page 53.
46
Features