Center Bearing - Chrysler laser 1990 Technical Information Manual

PROPELLER SHAFT - LBbro Joint / Center Bearing
groove
Inner race
ball groove
Outer race
ball groove

CENTER BEARING

The No. 1 and No. 2 center bearings are of the dual
anti-vibration support type that minimizes vibration
and noise. The first mount in the center bearing
This joint consists of the inner and outer races each havir,,
axially inclined grooves, balls and a cage to hold the balls. When
longitudinal or angular change takes place. the balls move the
inner and outer race grooves to absorb the change.
reduces propeller shaft vibration transmission to '
floor. The second mount at the bearing to flo,,
connection reduces the noise level.
ASSEMBLY
Section A-A