A-B Repeat Playback; Cd Programming; Checking Or Editing The Programmed Tracks; 10 Skip Function - Samsung MM-E430 User Manual

A-B Repeat Playback

You can repeatedly play back a designated section
of a CD.
1. Press the REPEAT A-B button at the beginning
of desired part.
• 'R A-' will be displayed.
2. Press the REPEAT A-B button at the ending of
desired part.
• 'R A-B' will be displayed.
3. To cancel REPEAT A-B function, press the
REPEAT A-B button again.
• 'R OFF' will be displayed.
➣
REPEAT A-B function is available only within a
track.

CD Programming

This function is not available during playback of an
MP3/WMA-CD.
• You can program the playback order of up to 24
tracks of your choice.
• However, you must stop playing the CD before
selecting tracks.
1. While in CD playback mode, press the STOP(@)
button to stop playing the CD.
(
2. Press the ENTER
message below:
(01= program number, --= track number)
3. Use the [ or ] button to move to a desired
track.
• Press [ to move to the previous track.
• Press ] to move to the next track.
(
4. Press the ENTER
selection, the selection is stored and
is displayed.
5. To select additional tracks, follows Steps 3
and 4 above.
6. Press the PLAY (+) button to play the
programmed tracks.
7. Press the STOP(@) button to stop playing the
programmed tracks, Press the STOP (@) button
again to cancel playing the programmed tracks.
• If you open the disc tray,change the function
or turn off the product, your programming
will be canceled.
• When programming ,the number(0~9)
buttons and +10/-10 button doesn't work.
8
English
)
button to display the
)
button to confirm your
Checking or Editing the
Programmed Tracks
You can check a list of programmed tracks and
edit them as you want.
1. If a programmed track is being played, press the
STOP (@) button once.
( )
2. Press the ENTER
the message below:
(C=Check, 01= program number)
➣
If a total of 24 tracks are already pro-
grammed, "C" will be displayed rather
than "P" in the display.
3. Press the ENTER
the desired track is displayed.
4. Press the [ or ] button to select a different
track.
(
5. Press the ENTER
selection.
6. To play the programmed tracks, press the Play
(+) button.

10 Skip Function

Press the +10 or -10 button while in playback mode.
The unit will skip as many as 10 tracks forward or
10 tracks back from the current track.
button twice to display
( )
button repeatedly until
)
button to confirm your