Table of Contents
Advertisement
POWER BASS
Your micro-compact system has a bass amplification
function called Power Bass.This function makes the
sound more powerful and real.
1.
Press the SOUND button on the remote control.
Result: “POWER BASS ON” is displayed.
2. To cancel this function, press this button again,
“POWER BASS OFF” is displayed for a few
seconds.
• The Power Bass is set to "OFF" automatically and
becomes not available during a CD recording.
Using Bluetooth
You can use a Bluetooth device to enjoy music with high
quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth is a technology that enables Bluetooth-compliant
devices to easily interconnect with each other using a short
wireless connection.
A Bluetooth device may involve with a noise or
`
malfunction, depending on usage.
-
When a part of human body is in contact with the
receiving/transmitting system of the Bluetooth device or
the Product.
-
Electrical variation from obstructions caused by a wall,
corner or office partitioning.
-
Electrical interference from same frequency-band devices
including medical equipment, microwave oven and
wireless LAN.
-
Pair the Product with the Bluetooth device while keeping
a close distance.
-
The farther the distance between Product and Bluetooth
device is, the worse the quality is. If the distance exceeds
the Bluetooth operational range, the connection is lost.
-
In poor reception-sensitivity areas, the Bluetooth
connection may not work properly.
-
This wireless device may cause an electric interference
during its operation.
-
The Product has an effective reception range of up to 10
meters in all directions if there are no obstacles. The
connection will be automatically cut off if the distance is
out of this range. Even within this range, the sound
quality may be deteriorated by obstacles such as walls or
doors.
To connect the Product to a Bluetooth device
1. Press the FUNCTION button on the remote control of
product to display the "BT/GAL" message.
• You will see “WAIT” for 2 seconds and then “READY”
display .
2. Select the Bluetooth menu on Bluetooth device you
want to connect. (Refer to Bluetooth device's user's
manual)
3.
Select the Stereo headset menu on the Bluetooth device.
• You will see a list of scanned devices.
4. Select "[Samsung] MICRO XXXXXX " from the
searched list.
• When the product is connected to the Bluetooth
device, the Product will display "CONNECT" on the
front display, followed by the device name of the
connected Bluetooth device.
5. Play music on the connected device.
• You can listen to the music playing on the connected
Bluetooth device over the Product.
• In Bluetooth mode, some model's Repeat/Stop/
Next/Back functions are not available.
➣ The Product only supports Middle Quality SBC data(up to
237kbps@48kHz), and does not support High Quality SBC
data(328kbps@44.1kHz).
• Only one Bluetooth device can be paired at a time.
• Search or connection by product may not be performed
properly in the following cases:
- If there emits a strong electric wave around product.
- If several Bluetooth devices are simultaneously paired with
product.
- If the Bluetooth device is turned off, not in place, or malfunctions.
- Note that such devices as microwave oven, wireless LAN
adapter, plasma bulb and gas stove use the same frequency
range as the Bluetooth device, which can cause an electric
interference.
To disconnect the Bluetooth device from the Product
You can disconnect the Product from the Bluetooth
device. (Refer to Bluetooth device's user's manual)
• The Product will be disconnected.
• When the Product is disconnected from the Bluetooth
device, the Product will display "DIS CON" on the
front display.
To disconnect the Product from the Bluetooth device
Press the F button on the top panel to switch from
“BT/GAL ” to another mode.
• Except disconnect through function conversion, the
connected Bluetooth device will wait a certain time
for response from the product before terminating the
connection. (Disconnection time may differ, depending
on the Bluetooth device)
• The currently connected device will be disconnected.
➣ In Bluetooth connection mode, the Bluetooth connection will be
lost if the distance between the Product and the Bluetooth device
exceeds the limit (10 meters). If the distance decreases to the
effective range or you restart the Bluetooth device, the Bluetooth
connection can be restored.
• If the Bluetooth device falls back in the effective range, you can
restart to restore the pairing with the Bluetooth device.
• With some Bluetooth devices, some functions may not work
properly.
14
English
Page 15
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
