Preparation before using your unit
Using standard batteries
1
Attach the external battery pack as
shown in the picture.
• Then, turn the lock control to secure
firmly in place.
2
Open the cover of the battery com-
partment.
3
Carefully check the correct orienta-
tion of the positive and negative ter-
minals of the batteries.
• Use two AA/R6 type 1.5 V batteries.
Use two AA/R6 alkaline batteries. Manganese
batteries have a shorter battery life.
Battery Life
(Using alkaline batteries)
Rechargeable Rechargeable Batteries +
Batteries
Battery Pack (type AA/R6)
MP3-CD
9 hours
20 hours
CD(when ESP is off) 8 hours
16 hours
CD(when ESP is on) 6 hours
14 hours
30 minutes
•
Replace the batteries if the remaining battery power indicator "
Time for
•
Even though the remaining battery power indicator "
Battery
batteries have already expired, the LCD remote control will not be lit.
•
Replacement
Should "
" flash, the player will automatically turn off the CD ESP ON mode to
conserve battery power consumption.
•
Standard batteries cannot be recharged.
•
The external battery pack cannot charge, as it does not have the capacity to charge.
Warning
•
Do not mix old and new batteries.
11
•
Remove the batteries if they will not be used for a long time.
•
Remove the standard batteries when you use an AC adaptor.
(not supplied)
" flashes.
" may be flashing, if the
CD Playback
1
Slide the Open button to
open the door.
Insert a CD.
• Push the door to close it.
2
Press the Play/Pause
(
) button.
• Once the CD is
recognized, playback
commences.
3
To stop playback, press
the Stop (
) button.
• Press the Stop (
)
button again to switch
off the unit.
To temporarily pause playback
Press the Play/Pause (
) button.
•
Playback will be temporarily suspended.
•
Press the Play/Pause (
) button again to resume
playback.
Open
Track Number Indicator
Playtime Indicator
12