Identify The Connectors And Attach The Cables - Netopia R2121 User Reference Manual

2-2 User's Reference Guide
Windows and Macintosh, ZTerm terminal emulator software and NCSA Telnet 2.6 for Macintosh
You will need:
A Windows 95-based PC or a Macintosh with Ethernet connectivity for configuring the Netopia R2121. This
may be built-in Ethernet or an add-on card, with TCP/IP installed and configured. See
SmartStart" on page
Two telephone lines, each with its own jack, or a single jack wired for two phone lines.

Identify the connectors and attach the cables

Identify the connectors and switches on the back panel and attach the necessary Netopia Router cables.
1. Connect the mini-DIN8 connector from the Power Adapter to the Power port, and plug the other end into an
electrical outlet.
2. Connect one end of one of the RJ-11 cables to the "Telco 1" port, and the other end to one of your wall
outlets.
3-1.
1 Ethernet
8
Ethernet
1
2 Telco
POTS Ports
"Before running
3
Power