Configuring Firewall Settings; Hosting An Application - Pace 5268ac User Manual

4. Go to the appropriate device and select the following options to override the
default DHCP settings:
•
Firewall. Determines whether the gateway firewall is enabled for the device.
•
Address Assignment. A specific address or address type.
•
WAN IP Mapping. The address or address pool from which you want to select
an IP address.
5. Click Save.

Configuring firewall settings

The gateway's default firewall settings block unwanted access from the Internet. Most
users will not need to change the default firewall settings.
If necessary, you can modify the firewall settings to allow certain Internet traffic or
users through the firewall to devices on your home network.

Hosting an application

To allow access from the Internet to applications running on computers inside your
home network, you need to open firewall pinholes and associate the intended
application with a computer connected with your gateway. If you cannot find a listing
for your application, you can define an application with the protocol and port
information. For more information, see "Defining an application profile" on page 22.
1. Open the gateway home page at http://192.168.1.254.
2. Click the Settings tab, then click the Firewall tab.
3. Click Applications, Pinholes and DMZ.
4. Select the computer that will host the application.
If the computer you want to select is unlisted because it is powered off and the
Hide inactive devices option is enabled, you can select it if it is on the same
network and you know its IP address. Enter the IP address and click Choose.
5. Select Allow individual application(s).
6. From the Application List panel, select the application you want to host.
You can filter the application list by selecting a category.
To select multiple applications, hold down the [Shift] or [Ctrl] keys while making
your selections. Using the [Shift] key lets you make your selections in a contiguous
order while the [Ctrl] key selects the groups in any order.
7. Click Add.
8. Click Save.
Chapter 3 Configuring the Gateway 21