Switching The Ice Cube Maker On And Off; Making A Large Amount Of Ice Cubes - Miele KFN 37692 iDE Operating And Installation Instructions

Switching the ice cube maker
on and off
^ Touch the settings sensor.
All symbols available for selection
appear in the display and the 0 symbol
flashes.
^ Touch the sensors for setting the
temperature (X or Y), repeatedly until
the ice cube maker symbol ®
flashes.
^ Touch the OK sensor to confirm your
selection.
^ By touching the X or Y sensor, you
can now select/deselect the ice cube
maker:
0: the ice cube maker is switched
off
1: the ice cube maker is switched
on
^ Touch the OK sensor to confirm your
selection.
The selected setting is applied.
^ Touch the settings sensor to leave
settings mode,
or
^ close the appliance door.
Otherwise the appliance will switch to
normal operation after approximately
one minute.
Making ice cubes
Only make normal domestic
quantities of ice cubes with the ice
cube maker.
Ice cubes can only be made when
the ice cube drawer is closed
completely.
After the appliance is switched on for
the first time, it can take up to 24
hours for the first ice cubes to drop
out of the ice cube maker and collect
in the drawer.
Thereafter, when the ice cube maker
is switched off and then on again it
will take up to a maximum of 6 hours
for ice cubes to be produced.
The ice cube maker can be switched
off independently of the freezer
section if you not want to make any
ice cubes.
If the ice cube maker is switched off,
the ice cube drawer can be used as
an extra drawer for freezing fresh
food and storing frozen food.

Making a large amount of ice cubes

The amount of ice cubes which the
appliance makes depends on the
temperature in the freezer section. The
lower the temperature, the more ice
cubes are produced within a certain
time frame. At a temperature of -18 °C
approx. 1 kg of ice cubes will be
produced in 24 hours.
Ice cube production is halted
automatically when the ice cube drawer
is full.
53