Miele KFN 37692 iDE Operating And Installation Instructions page 62

Cleaning and care
^ Grasp the plastic surround on the
left-hand side of the stainless steel
trim at its furthest back point.
1. Pull the plastic surround away from
the shelf and 2. pull the trim off at the
same time. Then do the same on the
opposite side.
^ 3. Pull the protective strip off the
back of the shelf.
^ After cleaning the shelf, attach the
stainless steel trim and protective
strip in the reverse order.
62
Bottle and door shelves
The stainless steel trim on the bottle
and door shelves is not suitable for
cleaning in a dishwasher.
To remove the stainless steel trim,
proceed as follows:
^ Place the shelf on a worktop, with the
front face down.
^ Grasp one end of the trim and pull it
away from the shelf. The complete
trim will then detach from the shelf.
^ After cleaning, refit the stainless steel
trim to the shelf in the reverse order.