Miele KFN 37692 iDE Operating And Installation Instructions page 72

Problem solving guide
Interior lighting
Problem
The LED lighting on
one of the shelves
is not working.
The LED lighting on
all of the shelves is
not working.
72
Possible cause
The shelf has not been
positioned correctly on the
shelf supports.
Liquid has spillt onto the
LED lighting on one of the
shelves or the metal discs
(contacts) in the left-hand
shelf supports.
The safety switch off
mechanism has switched
off the interior lighting.
If this is not the case, then
there is a fault.
Remedy
^ Push the shelf in until it
clicks into place.
^ Wipe the stainless steel
trim with LED lighting with
a damp cloth and dry it or
leave it outside the
appliance to dry. Clean
the metal discs (contacts)
in the shelf supports by
wiping and drying them.
Make sure that the contacts
are clean and dry before
inserting the shelves with
lighting in the appliance.
^ Push the shelf in until it
clicks into place.
^ Close the door.
When the door is opened
again the interior lighting will
come on.
^ Call Miele Service.