Headlights; Headlight Beam Adjustment - Yamaha YX10ZPSG Owner's Manual

4. Turn the key to "
electrical circuit in question to check if
the device operates. If the fuse blows
again immediately, have a Yamaha dealer
check the electrical system.
5. Install the panel.
EBU35261

Headlights

This model is equipped with LED headlights.
There are no user replaceable bulbs. If one or
more headlights do not come on, check for a
loose connection, check the headlight fuse,
and then have a Yamaha dealer check the ve-
hicle.
TIP
 When the headlights are set to low beam,
only the top half of each lamp will illuminate.
 When the headlights are set to high beam,
both halves of each lamp will illuminate.
" (on) and turn on the
EBU32681

Headlight beam adjustment

ECB00691
NOTICE
It is advisable to have a Yamaha dealer
make this adjustment.
To raise the beam, turn the headlight beam
adjusting screw in direction (a).
To lower the beam, turn the headlight beam
adjusting screw in direction (b).
(b)
(a)
1. Headlight beam adjusting screw
8-62
8
1