Yamaha YX10ZPSG Owner's Manual page 41

 The tripmeters will reset and continue
counting after 9999.9 is reached.
Pushing the "SELECT" button switches the
display between the odometer mode "ODO"
and the tripmeter modes "TRIP A" and "TRIP
B" in the following order:
ODO → TRIP A → TRIP B → ODO
To reset a tripmeter, select it by pushing the
"SELECT" button, and then push the "RE-
SET" button for three seconds. The tripme-
ters can be used to estimate the distance that
can be traveled with a full tank of fuel. This in-
formation enables you to plan future fuel
stops.
Clock, hour meter and voltage display
modes
1. Clock/Hour meter/Voltage display
2. "SELECT" button
3. "RESET" button
4. "MODE" button
The clock displays time in 12-hour format.
The hour meter shows the total time the en-
gine has been running.
The voltage display shows the battery volt-
age.
4-9
1 2 3 4
4