Yamaha YX10ZPSG Owner's Manual page 67

3
(a)
1. Locknut
2. Spring preload adjusting nut
3. Special wrench
TIP
 A special wrench can be obtained at a
Yamaha dealer to make this adjustment.
 The spring preload setting is determined by
measuring distance A, shown in the illustra-
tion. The shorter distance A is, the higher
the spring preload; the longer distance A is,
the lower the spring preload.
1
2
(b)
4-35
Spring preload setting:
Minimum (soft):
Distance A = 496.8 mm (19.56 in)
Standard:
Distance A = 484.1 mm (19.06 in)
Maximum (hard):
Distance A = 471.4 mm (18.56 in)
1. Distance A
3. Tighten the locknut to the specified
torque. NOTICE: Always tighten the
locknut against the adjusting nut, and
then tighten it to the specified torque.
[ECB00082]
1
4