Using Other Connectors - Finlux 65F8200-T Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Connecting to a DVD Player

If you want to connect a DVD player to your LED

TV, you can use connectors of the TV set. DVD

players may have different connectors. Please refer

to your DVD player's instruction book for additional

information. Power off both the TV and the device

before making any connections.

Note: Cables shown in the illustration are not

supplied.

•

If your DVD player has an HDMI socket, you can

connect via HDMI. When you connect to DVD player

as illustrated below, switch to HDMI source. See,

"Input Selection" section.

•

Most DVD players are connected through

COMPONENT SOCKETS. Use a component video

cable to connect video input. For enabling audio, use

a component audio cable as illustrated below. When

the connection is made, switch to YPbPr source.

See, "Input selection" section.

•

You may also connect through the SCART 1 or

SCART 2. Use a SCART cable as shown below.

Note: These three methods of connection perform the

same function but in different levels of quality. It is not

necessary to connect by all three methods.

Using Side AV Connectors

You can connect a range of optional equipment to your

LED TV using side connectors of the TV.

•

For connecting a camcorder or camera , you should

use SIDE AV socket (side). To do this, you must use

the supplied video/audio connection cable. First,

plug single jack of the cable to the TV's AV IN socket

(side). Afterwards, insert your camera cable's (not

supplied) connectors into the plural part of the video/

audio connection cable. Colours of the connected

jacks should match. See illustration below.

•

Afterwards, you should switch to

the section Input selection in the following sections

for more information.

•

To listen to sound from the TV on headphones, you

should connect headphones to your TV by using the

HEADPHONES Jack.