Table of Contents
Advertisement
more information about the installation, please refer
to appendix F.
Step 2: Connecting to a Wired or Wireless
Network
Wired Connection
•
Connect your network's LAN cable to the
INPUT of your TV. Make sure that the preparation
of media server, connections and network settings
are completed properly (See the chapter, Network
Settings for more information).
Wireless Connection
IMPORTANT: "Veezy 100" USB dongle is required to
use wireless network feature. To use your TV with your
wireless network, you need a "Veezy 100" Wireless
USB dongle.
•
Please plug in the Wi-Fi dongle to one of the USB
ports of the TV.
•
Select
Network Settings from the Settings
menu.
•
Press
YELLOW button to start searching for
available wireless networks. If any active wireless
networks are found, a list will be displayed.
•
Please select your desired network from the list. If
the selected network is protected with a password,
please enter the correct key by using the virtual
keyboard. You can use this keyboard via navigation
buttons (Left/Right/Up/Down) and OK button on the
remote control.
•
Wait until the IP address is shown on the screen. This
means that the connection is now established.
See the chapter Network Settings for detailed
configuration information. You can press BLUE button
to test internet speed.
Step 3: Playing Shared Files via Media
Browser
•
Select
Media Browser by using Left or Right button
from the main menu and press OK button. Media
browser will be then displayed.
•
DLNA support is available only with Media Browser
folder mode. To enable folder mode, go to Settings
tab in the main media browser screen and press
OK. In the settings options, highlight View Style and
change to Folder using Left or Right button.
•
Please select desired media type and press
ETHERNET
•
If sharing configurations are set properly, the
following OSD message will be displayed after
selecting the desired media type. Select OK to
display selected network or USB memory content.
If you want to refresh the device list, press GREEN
button. You can press MENU to exit.
•
If available networks are found, they will be listed
on this screen.
•
Select media server or network that you want to
connect by using " " or " " buttons and press
OK button.
•
If you select media type as
device from the selection menu, a new menu screen
will appear on the screen as below:
•
Select
video files from the selected network.
English - 28 -
Videos from this screen to list all the available
OK
Video and choose a
Advertisement
Table of Contents
