Installing without Base
Before You Install
Adjusting the Recline
Angle
• When installed, the recline
angle line on the shell of the
infant car seat should be level
to the ground.
• If there is a problem achieving
the proper recline angle after
installing:
* Uninstall the car seat and
remove from vehicle seat.
* Place a rolled towel(s)
or pool noodle(s) in the
vehicle seat bight.
* Position car seat with the
towel(s) or pool noodle(s)
to achieve a correct recline
angle.
22
Belt Guides
• Release the elastic loop on
the stroller adapter and lift
the cover to expose the belt
guides for installation.
Installing without Base
23