Installation; Location; Connections - Sanyo CLT-9670 Instruction Manual

Installation
LOCATION
Avoid places near electrical equipment such as refrigerators, computers, TVs or
fluorescent lamps. These may cause interference or reduce the operating range of
the cordless telephone.
CONNECTIONS
,,
JacK
Telephone cord
1
2
3
4
5
Insert the small plug of the AC adaptor into the DC 12V jack at the back of the
base station, and the other small plug of the AC adaptor into the jack at the back of
the charger.
Plug the AC adaptor into an AC 230V wall outlet.
Insert one plug of the telephone cord into a wall telephone jack and the other into
the TEL LINE jack on the base station.
Store the telephone cord by winding it around the cord holder on the back of the
base station.
Extend the base station antenna full-length.
4-Prong Jack
If you have a 4-prong jack, use a module 4-prong adaptor (not supplied).
Direct Wire Connection
If your current phone is wired directly into the wall, have the phone company install a
wall phone jack.
6