Table of Contents
Advertisement
Security code
The security code system prevents other cordless phone users in your neighbourhood
from interfering with the operation of your unit, by assigning a same code to both
handset and base station. Since the security code of this telephone was selected from
1,000,000 different codes, it is virtually impossible to find any other cordless telephone
having the same code as yours. However, if you wish to set your own security code,
follow the steps below.
1
2
3
4
5
6
Disconnect the AC adaptor.
&
we
J
Q
l\
\/
Set the POWER switch of the handset to the OFF
position.
Press and hold the handset 1 button on the base
station and reconnect the AC adaptor. Release the
handset 1 button.
&
w
Q
l\
J
\/
While pressing ~~]
on the handset, set the
POWER switch to ON. Release @~).
Enter the desired 6-digit number (000,000
using the dialing buttons on the handset.
999,999)
Press ~Kl
) on the handset.
You hear long beeps from both handset and base station.
Your personal security code is now set.
Steps 4-6
must be performed
within 20 seconds.
If not, five short beeps sound to indicate that you should start again from step 1.
22
Advertisement
Table of Contents
