Preparing To Install The Heat Exchanger - Viessmann VITOLADENS 300-T Installation Instructions Manual

Preparing to install the heat exchanger

A
3.
33 kW:
Installation position A or B, depending
whether the pipework is to be connected
(see page 16) on the l.h. or r.h. side of
the boiler.
For non-concentric flue systems (i.e.
routed separately or in parallel), select
installation position B.
B
33 kW
4x
1.
2.
40/50 kW
40 and 50 kW:
Pipes may be connected on either side.
Tighten nuts evenly and diagonally.
11