Related Manuals for Viessmann VITOPLANAR EI6
Summary of Contents for Viessmann VITOPLANAR EI6
- Page 1 VIESMANN Installation instructions for contractors Vitoplanar EI6 Type EI6.A325SDMH, EI6.A700SDMH, EI6.A900SDMH Infrared heater VITOPLANAR EI6 6169851 GB 1/2021...
- Page 2 Safety instructions Please follow these safety instruc- tions closely to prevent accidents and material losses. Safety instructions explained Danger Note This symbol warns against the risk Details identified by the word "Note" of injury. contain additional information. Please note This symbol warns against the risk of material losses and environmen- tal pollution.
-
Page 3: Safety Instructions
Safety instructions (cont.) Working on the appliance Work on electrical equipment may only Danger ■ be carried out by a qualified electrician. Hot surfaces on the appliance can Only connect appliances to correctly cause burns. ■ installed sockets. Before maintenance and service When working on the appliance, dis- work, switch off the appliance and ■... - Page 4 (cont.) Please note Mechanical loads can damage the appliance. Do not lean against the appliance. ■ Do not lean objects against the ■ appliance. Auxiliary components and individual parts For replacement, use only spare parts supplied or approved by Viessmann.
-
Page 5: Disposal Of Packaging
Large infrared radiant surface energy related products (ErP). Maintenance-free, no magnetic field ■ Horizontal and vertical installation ■ ■ Ceiling or wall mounting Vitoplanar EI6 Note Type Output in Dimen- Weight in A Vitoplanar wireless or switch mounting thermostat is sions in required for operation of the appliance. -
Page 6: Before Installation
Before installation Note Please note If mounted on a ceiling, the appliance must be installed Installation on uneven surfaces can cause dam- at least 1.8 m above the floor. age to the heating surface due to stress. Only install the appliance on level surfaces. Danger If mounted on a wall directly below a wall Note... - Page 7 Mounting the appliance on the ceiling 1. Position of fixing rails: See Fig. 3. 4. Connect the infrared heater. 2. Drill holes in the ceiling using a fixing rail (standard 5. Push the infrared heater into the fixing rails and delivery) as a template.
-
Page 8: Electrical Connection
Position of fixing rails Drill holes Fig. 3 Electrical connection Connection to wall socket, alternatively to wall junction See also installation instructions for thermostat. Fig. 4 Electrical connection RTH Room thermostat (accessories) - Page 9 Electrical connection (cont.) Connection via wall junction box Danger 2. Disconnect the existing plug and connect the Incorrect wiring can lead to serious injury from power cable to a wall junction box. electrical current and result in appliance dam- age. Note Connection to wall junction boxes must only be The power cable can be extended with a type...
-
Page 10: Specification
All components must be disposed of correctly. Declaration of Conformity We, Viessmann Werke GmbH & Co. KG, D-35107 Using the serial number, the full Declaration of Con- Allendorf, declare as sole responsible body that the formity can be found on the following website: named product complies with the European directives www.viessmann.co.uk/eu-conformity... - Page 11 Viessmann Climate Solutions SE Viessmann Limited 35108 Allendorf Hortonwood 30, Telford Telephone: +49 6452 70-0 Shropshire, TF1 7YP, GB Fax: +49 6452 70-2780 Telephone: +44 1952 675000 www.viessmann.com Fax: +44 1952 675040 E-mail: info-uk@viessmann.com...
- Page 12 Viessmann Climate Solutions SE Viessmann Limited 35108 Allendorf Hortonwood 30, Telford Telephone: +49 6452 70-0 Shropshire, TF1 7YP, GB Fax: +49 6452 70-2780 Telephone: +44 1952 675000 www.viessmann.com Fax: +44 1952 675040 E-mail: info-uk@viessmann.com...