VIESMANN Installation instructions for contractors Vitoplanar EC4 Type EC4.A500S to EC4.A2000S Wall convector, 0.5 to 2 kW Direct electric heating for rapid heating of living spaces VITOPLANAR EC4 5855581 GB 2/2018...
Safety instructions Please follow these safety instructions closely to prevent accidents and material losses. Safety instructions explained Danger Note This symbol warns against the risk of injury. Details identified by the word "Note" contain additional information. Please note This symbol warns against the risk of material losses and environmental pollution.
Page 3
– No persons should lean against it – No objects, e.g. furniture, should be leant against it Auxiliary components and individual parts For replacement, use only spare parts supplied or approved by Viessmann.
Please dispose of packaging waste in line with statu- DE: Use the disposal system organised by tory regulations. Viessmann. AT: Use the ARA statutory disposal system (Altstoff Recycling Austria AG, licence number 5766). CH: Packaging waste is disposed of by the HVAC contractor.
Clearance dimensions For safety reasons, the following minimum clearances from furniture and flammable objects must be observed: 10 cm from the top cover ■ ■ 10 cm from the side panels ■ 15 cm from the floor ■ 50 cm from the front (warm air discharge) The wall mounting bracket ensures a clearance of 22 mm at the back.
Mounting the appliance on the wall Please note 1. Align the wall mounting bracket depending on the product type and installation type. The appliance must not be installed directly below a wall socket. 2. Secure the wall mounting bracket in place using When installing the appliances in rooms with a suitable rawl plugs and screws.
Page 7
Electrical connection (cont.) Danger Please note Incorrect wiring can lead to serious injury from Connecting the black wire (control cable/pilot electrical current and result in appliance dam- line) to earth (PE) will cause a short circuit and age. will destroy the electronics. Ensure that the wires of the power cable are Insulate the black wire if it is not being used as a correctly connected.
(ErP). Final decommissioning and disposal Viessmann products can be recycled. Components For decommissioning the system, isolate the system and substances from the system are not part of ordi- from the power supply and allow components to cool nary household waste.
Need help?
Do you have a question about the Vitoplanar EC4.A500S and is the answer not in the manual?
Questions and answers