Gs748Tr Front And Back Panel Configuration - NETGEAR GS700TR Series Hardware Installation Manual

GS700TR Series Hardware Installation Guide
• System LEDs
Figure 2-2 illustrates the NETGEAR GS724TR Smart Switch back panel:
Figure 2-2
The back panel contains the following:
• A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for
accommodating the supplied power cord.

GS748TR Front and Back Panel Configuration

The GS748TR is a 48-Port 10/100/1000M Smart Static Routing switch + 4 SFP Combo port
switch. Every RJ45 port is capable of sensing the line speed and negotiating the operation duplex
mode with the link partner automatically
Figure 2-3 illustrates the NETGEAR GS748TR Smart Switch front panel:
System LEDs
Figure 2-3
The front panel contains the following:
• 48 RJ-45 connectors for 10/100/1000Mbps auto sensing Gigabit Ethernet switching ports.
• Four SFP slots for SFP modules supporting 1000(1000Base-SX/LX)/100M SFP.
• Reset button to restart the device.
• Recessed default reset button to restore the device back to the factory defaults.
• Port LEDs
2-6
Port LEDs
10/100/1000M Ethernet Ports
v1.0, December 2007
RS-232 Power Connector
SFP Ports
Physical Description