Table of Contents
Advertisement
•
Auto Uplink™ on all ports to make the right connection.
•
Automatic address learning function to build the packet-forwarding information table. The
table contains up to 4K Media Access Control (MAC) addresses.
•
Full- and Half-duplex functions for all 10/100/1000 Mbps ports.
•
Store-and-Forward transmission to remove bad packets from the network.
•
Full-duplex IEEE 802.3x pause frame flow control.
•
Active flow control to minimize packet loss/frame drops.
•
Half-duplex back-pressure control.
•
Per port LEDs, System LEDs.
•
Standard 1U high, rack mountable 17" chassis.
•
Fan speed control supported.
Package Contents
Figure 1-1
shows the package contents of the NETGEAR GS700TR Series Smart Switch.
Figure 1-1
Verify that the package contains the following:
•
NETGEAR Smart Switch
Introduction
GS700TR Series Hardware Installation Guide
v1.0, December 2007
1-3
Advertisement
Table of Contents
Troubleshooting
