Makita HM0860C Instruction Manual page 6

ASSEMBLY
1
1. Side grip
1
2
1. Side handle
2. Clamp nut
2
1
1. Bit shank
2. Bit grease
6
CAUTION:
• Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
For tool with side grip (auxiliary handle)
004483
The side grip swings around to either side, allowing easy handling of the tool in
any position. Loosen the side grip by turning it counterclockwise, swing it to the
desired position and then tighten it by turning clockwise.
Side handle(auxiliary handle)
005275
The side handle can be swung 360° on the vertical and secured at any desired
position. It also secures at eight different positions back and forth on the hori-
zontal. Just loosen the clamp nut to swing the side handle to a desired posi-
tion. Then tighten the clamp nut securely.
Bit grease (optional accessory)
Coat the bit shank head beforehand with a small amount of bit grease (about
0.5 -1 g;.). This chuck lubrication assures smooth action and longer service
life.
Installing or removing the bit
003150
Clean the bit shank and apply bit grease before installing the bit.