Chapter 5: Troubleshooting; Troubleshooting Chart; Table 5-1. Troubleshooting Chart - NETGEAR FS 517TS User Manual

CHAPTER 5: TROUBLESHOOTING

This chapter provides information about troubleshooting the NETGEAR FS517TS or
FS524S Switches. Topics include:

• Troubleshooting chart

• Additional troubleshooting suggestions
Troubleshooting Chart
Table 5-1 lists symptoms, causes, and solutions of possible problems.

Table 5-1. Troubleshooting Chart

Symptom
Power LED is off.
1000M or 100M LED
is off or intermittnet.
Cause
No power is received
Port connection is not working
Solution
Check the power cord connections
for the switch at the switch. and the
connected device.
Make sure all cables used are
correct and comply with Ethernet
specifications.
Check the crimp on the connectors
and make sure that the plug is
properly inserted and locked into the
port at both the switch and the
connecting device.
Make sure all cables used are
correct and comply with Ethernet
specifications. See Appendix C.
Check for a defective adapter card,
cable, or port by testing them in an
alternate environment where all
products are functioning.
troubleshooting 5-1