10/100 Mbps Rj-45 Ports; Figure 2-2. Front And Back Panels Of The Fs524S Switch - NETGEAR FS 517TS User Manual

Front Panel of the Model FS524 s Switch
10/100 Mbps
100 Mbps
LEDs
Stack LEDs
Power
Activity/Collision LEDs
LED
Rear Panel of the Model FS524 s Switch
Fans
Stacking
ports

Figure 2-2. Front and Back Panels of the FS524S Switch

10/100 Mbps RJ-45 Ports

As Figures 2-1 and 2-2 show, the FS517TS Switch has 16 RJ-45 ports, while the
FS524S Switch has 24 RJ-45 ports. These ports are auto-sensing 10/100 Mbps ports:
When you insert a cable into an RJ-45 port, the switch automatically ascertains the
maximum speed (10 or 100 Mbps) and duplex mode (half- or full-duplex) of the
attached device, and displays this information using the front panel 100 Mbps and FDX
LEDs for that port (LEDs are described in the next section). The 10/100 Mbps ports
support only unshielded twisted-pair (UTP) cable terminated with an 8-pin RJ-45 plug.
ports
Normal/Uplink
push button
physical description 2-3