To Set The Timer - Hitachi RAS-50WX8 Service Manual

HOW TO SET THE TIMER
Time
After you change the
batteries;
TIME
OFF TIMER
ON TIMER
RESERVE
OFF-Timer
CANCEL
You can set the device to turn off
at the present time.
ON-Timer
The device will turn on
at the designated times.
1
Press the (ON-OFF)
ON/OFF-Timer
button so that the
mark blinks.
Start Stop
The device will turn on (off) and off
(on) at the designated times.
The switching occurs first at the
preset time that comes earlier.
PM
The arrow mark appearing on the
display indicates the sequence of
switching operations.
How to Cancel Reservation
Point the signal window of the remote controller toward the indoor unit, and press the
button.
The (RESERVED) sign goes out with a beep and the
NOTE
You can set only one of the OFF-timer,
ON-timer and ON/OFF-timer.
1
Set the (TIME) button.
AM
PM
1
Press the
button. The (OFF) mark blinks
on the display.
Start STOP
AM
1
Press the (ON-TIMER)
Start
Stop
button the (ON) mark blinks
on the display.
AM
3
2
Set the turn-off time Press the
(OFF) with the TIMER control
TIMER) button so that the
button.
(OFF) mark lights and
Press the (RESERVE)
the (ON) mark blinks.
button.
PM
PM
(CANCEL)
(TIMER) lamp turns off on the indoor unit.
– 12 –
3
2
Set the current time with the
Press the
TIMER control button.
(TIME) button.
AM
PM
2
(OFF-TIMER) Set the turn-off time with the
TIMER control button.
PM PM
2
Set the turn-on time with the
TIMER control button.
AM AM
4
(ON-
Set the turn-on time with the
TIMER control button.
PM PM
AM AM
AM
The timer may be used in three ways: off-timer, on-timer, and ON/OFF (OFF/ON)-timer. Set the
current time at first because it serves as a reference.
As the time settings are stored in memory in the remote controller, you only have to press the
(RESERVE) button in order to use the same settings next time.
4
Press the (TIME) button again.
The time indication starts lighting
instead of flashing.
PM PM
PM PM
Example: The current time is 1:30 p.m.
3
Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE) button.
The (OFF) mark starts lighting instead of flashing and the sign
lights. A beep occurs and the (TIMER) lamp lights on the indoor unit.
Example: The device will turn off at 11:00p.m.
PM PM
The setting of turn-off time is now complete.
3
Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE) button.
The (ON) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the (TIMER) lamp lights on the indoor unit.
Example:
The device will turn on at 7:00 a.m.
AM AM
The setting of the turn-on time is now complete.
5
Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE) button.
The (ON) mark starts lighting instead of flashing and the
sign lights. A beep occurs and the (TIMER) lamp lights on the indoor unit.
Example:
The device will turn off at 10:30 p.m. and it will be turned on
PM PM
at 7:00 a.m.
The settings of the turn-on/off times are now complete.
AM AM
– 13 –
The time indication will disappear
automatically in 10 second.
To check the current time setting,
press the (TIME) button twice.
The setting of the current time is
now complete.
(RESERVED)
(RESERVED)
(RESERVED)