The Router's Rear Panel - NETGEAR WGR101 Reference Manual

The Router's Rear Panel

The rear panel of the router is shown below.
Viewed from left to right, the rear panel contains the following features:
Reset
Button
Figure 2-3: WGR101 Rear Panel
• Reset: This push button can reset the router to the last settings, or reset to the factory default
settings.
If you want to:
Reset
Reset to factory After power-on for about five
• Ethernet: This port is used for Internet (WAN) connection via an RJ45 wall port, router, or
cable modem. It is also used as a LAN port to connect the router to a local computer.
• Power: The AC power adapter outlet.
Introduction
Reference Manual for the 54 Mbps Wireless Travel Router WGR101
Ethernet
WAN/LAN Port
Hold Reset button down
After power-on
seconds
February 2005 (202-10034-03)
Power
Release Reset button
When power LED is still on
When the Power LED is flashing
2-7