PANEL INSPECTION
1.
All LEDS ON INSPECTION
Please confirm if LCD Display is below, all LEDs are on and no variation of brightness.
Also please confirm if [START/STOP] LED is orange.
After confirmation, please press [F3] to go to next inspection
2.
SW/LED INSPECTION
At first, [STYLE PLAY] LED is on. Please confirm LED ON according to the following list and
press SW in order.
Display example:
Current SW Name
QA Full Inspection
When you press two SWs simultaneously, these SWs name is diplayed
here. This display remain.
Pa-50
Next SW name
6