Mitsubishi Electric WD-60C10 Service Manual page 42

MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-60638CA / WD-65638 / WD-65638CA /
WD-73638 / WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838
Data Transfer Procedure:
V43+ & V43++
1. Enter the Service Mode <MENU><2-4-5-7> Select the Data Transfer & Geometry Menu <0>
Data Transfer & Geometry Menu <MENU><2-4-5-7><0>
RESTORE ENGINE DATA FROM BACKUP
RESTORE GEOMETRY DATA FROM BACKUP
MANUAL GEOMETRY ALIGNMENT
RESTORE INDEX DELAY
SAVE ENGINE AND GEOMETRY SETTING TO BACKUP
BACKUP AND RESTORE ISF SETTINGS
RED ONLY AND GREEN ONLY
Warning - Only use "SAVE ENGINE AND GEOMETRY SETTING TO BACKUP"
Note: Besides MANUAL GEOMETRY ALIGNMENT, six data transfer choices are listed on screen.

RESTORE ENGINE DATA FROM BACKUP - copies backup factory adjustments HVPOS, White Balance
and Index Delay from the Optical Engine to the PWB-MAIN.

RESTORE GEOMETRY DATA FROM BACKUP - copies backup factory Geometry Alignment data from
the Optical Engine to the PWB-MAIN.

RESTORE INDEX DELAY - copies factory Index Delay Adjustment data from the Optical Engine to the
PWB-MAIN.

SAVE ENGINE AND GEOMETRY SETTING TO BACKUP - copies all working data from the PWB-MAIN
into backup memory on the Optical Engine.

BACKUP AND RESTORE ISF SETTINGS - allows the ISF (ADV) video settings to be backed up and
restored using an external USB flash drive.

RED ONLY AND GREEN ONLY - displays the video in red or green only during ISF Calibration.
2. Use the <> buttons to select the item and press <ENTER>.
3. Follow on-screen instructions if given.
4. Press <EXIT> to quit.
after Optical Engine replacement.
Page 42