Download  Print this page

Duct Assembly Removal - Mitsubishi Electric WD-60C10 Service Manual

Dlp projection hdtv.
Hide thumbs

Advertisement

MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-60638CA / WD-65638 / WD-65638CA /
WD-73638 / WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838
DUCT ASSEMBLY - Removal and Disassembly
Upper Duct Removal
1. Loosen two screws (A) and remove the Lamp Cartridge.
2. Disconnect the Exhaust and Sirocco Fan Connectors (J4 and J8) from the back of the Engine and loosen the
wiring harnesses from the looms.
3. Remove screw (B) from the top of the Upper Duct and release the latches.
4. Remove the Upper Duct from the Optical Engine Assembly.
J8
(Sirocco Fan)
J4
(Exhaust Fan)
UPPER DUCT
A
LOWER DUCT
LATCH
B
LATCH
Page 13
LATCH
LATCH
LATCH

Advertisement

Table of Contents

   Also See for Mitsubishi Electric WD-60C10

   Related Manuals for Mitsubishi Electric WD-60C10

Comments to this Manuals

Symbols: 0
Latest comments:
  • Darrell Feb 11, 2017 06:56:
    The status button is flashing and the TV will not come on