Mitsubishi Electric WD-60C10 Service Manual page 28

MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-60638CA / WD-65638 / WD-65638CA /
WD-73638 / WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838
DIGITAL SIGNAL INFORMATION
Information on the currently selected digital channel can be displayed on screen.
1. Enter the Option / Service Menu <MENU><2-4-7-0>.
V43C & V43 Option / Service Menu
<MENU><2-4-7-0>
Service Menu
1. Information
2. Reset All Settings
3. Calibration
4. Test Pictures
VERSION: Vxx xxx.xx.xx
2. V43C & V43 Chassis select "Information" and <ENTER>.
V43+ & V43++ Chassis select "Digital Signal Strength" and <ENTER>.
V43C & V43 Digital Signal Information
"Information" <ENTER>
System Info
Source/Channel Info
Source ID: 1
Source Type: RF
Source/Channel Status: Channel Acquired
RF Band: Air
RF Channel: 39
Frequency: 62300
Signal Quality: 90
Video PID: 49
Audio PID: 52
PCR PID: 49
Audio/Video Stream Info


Video Resolution: 1920 x 1080
Video Scan Rate: 29.97
Video Scan Type: Interlaced
Audio Type: AC3
Audio Sample Tate: 48k
V43+ & V43++ Option Menu
<MENU><2-4-7-0>
Initialize
Power Restore
Production Mode
Digital Signal Strength
NetCommand Software
Total hours of use
V43+ & V43++ Digital Signal Information
"Digital Signal Strength" <ENTER>
Frequency(MHz)
Signal Level
Modulation
Carrier Lock
SNR
Correctable errors
Un Correctable errors
Page 28
OFF
OFF
<1~9>
Vxx xxx.xx
0
Tuner
749
<1~9>
8VSB Air
Locked
29.09
0
0