Mitsubishi Electric WD-60C10 Service Manual page 21

MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-60638CA / WD-65638 / WD-65638CA /
WD-73638 / WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838
Screen Assembly Removal
1. Remove screws (A) around the bottom rear edge.
2. Pull off ornamental Front Covers and Speaker Grills.
3. (V43+) Remove the Pedestal and Bezel by removing screws (B).
4. (V43++) Remove the Speaker Box and Pedestal by removing screws (B).
5. Remove screws (C) from the bottom front of the screen assembly.
6. Remove screws (D) from the top rear edge of the cabinet.
NOTE: Leave one screw secure at the top. Then support the assembly to prevent it from falling while
removing the remaining screw.
A
A
(V43++)
PEDESTAL
D
SCREEN REPLACEMENT 82" Models
SPEAKERBOX
B
B
(V43+)
B
A
A
D
Page 21
BEZEL
PEDESTAL
B
C B
D