Download  Print this page

Color Wheel Replacement - Mitsubishi Electric WD-60C10 Service Manual

Dlp projection hdtv.
Hide thumbs


MODELS: WD-60C10 / WD-65C10 / WD-73C10 / WD-60638 / WD-60638CA / WD-65638 / WD-65638CA /
WD-73638 / WD-60738 / WD-65738 / WD-73738 / WD-82738 / WD-65838 / WD-73838 / WD-82838
CAUTION: This procedure should be performed in a dust free environment.
Any dust entering into the color wheel compartment can cause abnormalities in the picture.
1. Remove the Optical Engine Assembly.
2. Remove the Lens Collar and cover the projection lens to protect it from scratches. See previous page.
3. Disconnect the 2 connectors, J6 & J7, from the front side of the Light Engine. Note the orientation of the
ribbon cable for re-assembly (Silver Contacts towards the Lens).
4. Access the Color Wheel Compartment from the bottom of the Optical Engine
5. Remove 2 screws (A) and lift the cover off of the color wheel compartment.
6. Remove the 3 screws (B) from the Color Wheel Assembly.
7. Use the metal Handle to lift the Color Wheel from the compartment.
8. For installation, reverse the procedure above.
CAUTION: Avoid touching or scratching the Color Wheel.
9. After re-assembly, perform the Index Delay Adjustment described in the Service Adjustments section.
IMPORTANT: To prevent damage in return shipping, pack the original color wheel the same way the
replacement part was sent to you.


Color Wheel Compartment
Page 17
J6 & J7
(Opposite Side of Formatter PWB)


Table of Contents

   Also See for Mitsubishi Electric WD-60C10

   Related Manuals for Mitsubishi Electric WD-60C10

Comments to this Manuals

Symbols: 0
Latest comments:
  • Darrell Feb 11, 2017 06:56:
    The status button is flashing and the TV will not come on