Timex w273 User Manual page 35

TEMPErATurE
The temperature sensor is always on and will take a read-
ing at least once every 60 seconds. The temperature is
indicated by the lower hand and accompanying scale.
When worn on wrist, temperature reading is affected by
body heat. For more accurate readings, remove watch
from wrist.
DEPTH SEnSor on/oFF
The sensor is normally off, and must be turned on manu-
ally prior to submersion. Push and release button B to
turn the sensor on. The 4th center hand will move from
the OFF (6 o'clock) position to the 12 o'clock position
and begin to take readings at least once every 5 seconds.
As the depth increases, the 4th center hand will point to
the actual depth as indicated on the depth scale. If the
readings remain in the range of 0 to 2 meters (0-6 feet)
64
for 5 minutes, the sensor will automatically turn off. To
turn the sensor off manually, press and hold button B for
2 seconds. The 4th center hand will move to the OFF (6
o'clock) position.
rECAll MAXIMuM DEPTH/MInIMuM TEMPErATurE
Unscrew the crown and pull to the middle position. The
center and lower hands will move to display the maxi-
mum recorded depth value and the minimum recorded
temperature value, respectively. If the watch has not yet
been used, then the center and lower hands shall move
to display 0 meters/feet and 0ºC/32 ºF, respectively. The
crown must be screwed back in prior to use/submersion.
BATTErY lEVEl DETECTIon
The watch determines the battery level status and
provides the user with a visual indication corresponding
to the current battery level. The battery level status is
65