Timex w273 User Manual page 33

To turn the altimeter off with the current unit set to FEET,
press C. To turn the altimeter off with the unit set to ME-
TERS, press C twice (lower hand goes to FEET first before
going to the OFF position).
The watch will automatically turn the altimeter off after
60 minutes from activation.
AlTIMETEr MIn/MAX AlTITuDE rECAll
To view the maximum recorded altitude, press A. The
lower retrograde hand shows the unit of measure that
the maximum altitude was recorded in if the altimeter
was OFF at the moment of button press, otherwise
it will show the maximum altitude using the current
selected unit. The 4th center hand shows the maximum
altitude's hundreds and tens value with divisions every
ten METERS/FEET. The upper retrograde hand shows the
60
maximum altitude's thousands value with divisions every
one thousand METERS/FEET.
The maximum recorded altitude is displayed for ten
seconds. To extend the display duration for another ten
seconds, press A before the previous ten second duration
expires.
To change the unit from METERS to FEET or FEET to
METERS, press C.
To view the minimum recorded altitude, press B. The
lower retrograde hand shows the unit of measure that
the minimum altitude was recorded in if the altimeter
was OFF at the moment of button press, otherwise
it will show the minimum altitude using the current
selected unit. The 4th center hand shows the minimum
altitude's hundreds and tens value with divisions every
61