Timex w273 User Manual page 17

3. Press C (COMPASS) to begin. The 4th center hand
rotates two revolutions to remind you to rotate the
watch. While level, SLOWLY rotate the watch two
revolutions, taking at least 15 seconds per revolution.
4. When done, press C (Compass), keeping the watch
level. The 4th center hand moves back and forth to
acknowledge the end of calibration and then moves to
the current magnetic declination setting.
28
5. If you do not wish to set the magnetic declination,
push the crown in. Otherwise, to have watch
automatically compensate for the declination angle,
turn the compass ring until north is at 12 o'clock.
6. Press A or B to move the 4th center hand west (-)
or east (+), respectively, to point to your location's
declination angle using the declination scale. Hold a
button to move the hand quickly. See the fi gure below
for an example.
7. Push the crown in when done.
Magnetic declination set to -14° (14°W)
29