Appendix; Resetting And Restoring - Security-Center TV7203 Installation Instructions Manual

Appendix

A. Resetting and restoring
At the back side of the netzwork camera is a button. Press this button to reset the system or restore the factory
parameter settings. Sometimes the normal system status can be restored by a reset. If you have further
problems following a reset, restore the factory parameter settings and reinstall and reconfigure the system.
RESET:
Press the reset button with a pointed object.
RESTORE:
1. Press the button continuously with a pointed object.
2. Wait until the self-test runs a second time.
3. Release the reset button as soon as the second self-test starts.
If the factory parameter settings are restored,
all the previous settings are deleted. The system
can be reset or restored.
Reset-Button
36