Adjusting The Door Hinges - Miele CVA6800 Operating And Installation Instructions

Installation
The appliance comes with four M5
socket screws to help you align and se‐
cure it in the building-in niche.
 Open the appliance door, and partial‐
ly tighten the side socket screws.
 Carefully turn the lower socket
screws to center the machine in the
niche.
 Tighten both upper socket screws by
hand to secure the machine in the
unit. Do not over-tighten them.
98

Adjusting the door hinges

If the machine door becomes difficult to
open or close after installation, you can
adjust the hinges to realign it (TX 20):
 Tighten the screw  to align it flush
with the cabinet front.
 Tighten the screw  to align the door
horizontally and vertically.