Drip Tray - Miele CVA6800 Operating And Installation Instructions

Drip tray


Burn hazard!
If the rinsing process has just finish‐
ed, wait a few minutes before remov‐
ing the drip tray as the water used
for rinsing will run out of the coffee
dispensers.
Clean the drip tray every day to pre‐
vent unpleasant odors and mildew.
A prompt will appear in the display
when the drip tray is full and needs to
be emptied. Remove the tray and emp‐
ty it at the latest when this prompt ap‐
pears.
 Open the machine front and carefully
remove the drip tray from the ma‐
chine.
The grid in the drip tray prevents the
water from spilling out of the tray
when it is being carried.
 Clean the drip tray and the grid with
hot water and liquid dish soap or in
the dishwasher and dry with a cloth.
Cleaning and care
 Clean the contacts (metal plates) and
the space between them carefully
and dry them thoroughly.
Only clean and dry contacts can
sense whether the drip tray is full.
Check this area once a week.
 Clean the space under the drip tray.
 Push the drip tray back into the cof‐
fee system.
Make sure the drip tray has been
pushed into its niche as far as it will
go.
59