RX-V1067/HTR-8063/RX-A1000
When checking the P.C.B.:
•
Put the rubber sheet and the cloth over this unit.
Follow the procedure below to place the amp unit.
(Fig. 6)
•
Connect the ground points of the heatsink and sub-
chassis unit to the chassis with a ground lead or the
like. (Fig. 6)
•
When connecting the flexible flat cable, be careful
with polarity.
•
Reconnect all cables (connectors) that have been
disconnected.
Rubber sheet and cloth
ゴムシー トと布
AMP unit (R)
Ground lead
アース線
20
Sub-chassis unit
サブシャーシユニッ ト
P.C.B. をチェックする場合には:
・ 本機の上にゴムシートと布を敷き、下図のようにア
ンプユニットを置きます。 (Fig. 6)
・ ヒートシンクとサブシャーシユニットのアースを
リード線等でシャーシに接続してください。 (Fig. 6)
・ フラットケーブルを接続する際、極性に注意してく
ださい。
・ 外したケーブル(コネクター)をすべて接続します。
Fig. 6
AMP unit (L)
Ground lead
アース線