Adjusting The Width Of The Armrests; Releasing The Seat So That It May Rotated And/Or Removed - Excel Entice User Manual

7.3 Adjusting the width of the armrests

The knobs to release the armrests are located in the back, under the
seat (1).
Turn the knobs to release the armrests
-
Adjust the armrests to the desired width
-
Retighten the knobs
-

7.4 Releasing the seat so that it may rotated and/or removed

The seat can be rotated to the side to ease getting on and off of the scooter. In this position, the seat can also be
removed.
The lever for releasing the seat so that it can be rotated is located under the seat on the right (1).
Push the lever forward to release the seat.
-
Rotate the seat to the side.
-
If desired, firmly grip the seat by the backrest and the front edge and pull upwards to remove it.
-

Note:
Do not use the uppermost hole. In this position the seat is too low, and does not have enough clearance above the
cowling.
Adjust the seat height.
-
Reposition the bolt and tighten.
-
© 2013 VAN OS MEDICAL B.V., Koperslagerij 3, 4651 SK, Steenbergen, The Netherlands
Tel. +31-(0)167-573020, Fax +31-(0)167-573381, E-mail: info@vanosmedical.nl, www.vanosmedical.com
~ 10 ~
Overall user manual