Technical Data; Warranty Disclaimer - Match PP 41DSP User Manual

Technical Data

Output power RMS / max:
• Front / Rear channels @ 4 Ohms: .............................4 x 35 / 70 Watts
• Front / Rear channels @ 2 Ohms: .............................4 x 50 / 100 Watts
Frequency range .............................................................20 Hz - 22.000 Hz
Number of input channels................................................4 x highlevel
DSP resolution .................................................................56 Bit
DSP processing power ....................................................50 MIPS
Total harmonic distortion (THD) .......................................< 0,03%
Signal-to-noise ratio.........................................................> 100 dB
Damping factor ................................................................> 100
Input impedance ..............................................................30 Ohms
Undervoltage detection....................................................9,6 Volts (max. 5 sec. down to 6 Volts)
Overvoltage detection......................................................17 Volts
Dimensions (H x W x D) ..................................................44 x 185 x 124 mm / 1,73 x 7,28 x 4,88"
Additional features ...........................................................fully stabilized internal power supply with start-

Warranty Disclaimer

The limited warranty comply with legal regulations.
Failures or damages caused by overload or impro-
per use are not covered by the warranty.
Please return the defective product only with a
valid proof of purchase and a detailed malfunction
description.
Technical specifications are subject to change!
Errors are reserved!
stop capability, 56 bit digital signal processing,
internal memory for a maximum of 16 different
sound setups, 2-digit LED display for indicating
the chosen setup
For damages on the vehicle and the device, caused
by handling errors of the device, we can't assume
liability.
All MATCH amplifiers are tagged with a E-Certifi-
cation number and also a CE-Certification mark.
Thereby these devices are ceritified for a use
inside vehicles inside the European Union (EU).