Technical Data; Declaration Of Conformity; Noise/Vibration Information - Bosch GKS 85 Original Instructions Manual

OBJ_BUCH-293-003.book Page 22 Tuesday, August 21, 2007 3:45 PM
22 | English

Technical Data

Circular Saw
Article number
Rated power input
No-load speed
Rotational speed under
load, max.
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
Reduced starting cur-
rent
Base plate dimensions
Saw blade diameter,
max.
Saw blade diameter,
min.
Blade thickness, max.
Tooth thickness/set-
ting, max.
Tooth thickness/set-
ting, min.
Mounting bore
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
1 609 929 K67 | (21.8.07)

Declaration of Conformity

We declare under our sole responsibility that
GKS 85
the product described under "Technical Data" is
Professional
in conformity with the following standards or
3 601 E7A 0..
standardization documents: EN 60745 accord-
ing to the provisions of the directives
W 2200
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
rpm 5000
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
rpm 3500
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
mm 85
Dr. Egbert Schneider
mm 65
Senior Vice President
Engineering
mm 383 x 170
30.07.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
mm 235

Noise/Vibration Information

mm 230
Measured values determined according to
EN 60745.
mm 2.2
Typically the A-weighted noise levels of the
product are: Sound pressure level 99 dB(A);
mm 3.2
Sound power level 110 dB(A). Uncertainty
K =3 dB.
mm 2.0
Wear hearing protection!
mm 30
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
kg 7.5 tainty K =1.5 m/s
The vibration emission level given in this infor-
/ II
mation sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another.
It may be used for a preliminary assessment of
exposure.
The declared vibration emission level repre-
sents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the
vibration emission may differ. This may signifi-
cantly increase the exposure level over the total
working period.
Dr. Eckerhard Strötgen
Head of Product
Certification
2
=3.5 m/s , Uncer-
h
2
.
Bosch Power Tools