Summary of Contents for Bosch GKS 18 V Professional
Page 1
Robert Bosch GmbH Power Tools Division 70745 Leinfelden-Echterdingen GKS Professional www.bosch-pt.com 18 V | 24 V 1 609 929 N80 (2008.02) O / 333 de Originalbetriebsanleitung el Πρωτότυπο οδηγιών χρήσης ro Instrucţiuni de folosire en Original instructions tr Orijinal işletme talimat...
Page 2
GKS 18 V GKS 24 V Professional 1 609 929 N80 | (6.2.08) Bosch Power Tools...
Keep your hair, clothing Damaged or entangled cords increase the and gloves away from moving parts. risk of electric shock. Loose clothes, jewellery or long hair can be caught in moving parts. Bosch Power Tools 1 609 929 N80 | (6.2.08)
Use of the power tool for piece. operations different from those intended could result in a hazardous situation. 1 609 929 N80 | (6.2.08) Bosch Power Tools...
Page 7
Do not operate the saw if lower guard does not move freely and close instantly. Never clamp or tie the lower guard into the open position. If saw is acci- Bosch Power Tools 1 609 929 N80 | (6.2.08)
Such saw blades can easily break. profiles, can also be sawed. Working ferrous metals is not permitted. Do not saw ferrous metals. Red hot chips can ignite the dust extraction. 1 609 929 N80 | (6.2.08) Bosch Power Tools...
27 Cutting-depth scale 28 Set of screw clamps* 29 Guide rail* 30 Connection piece* 31 Vacuum hose* 32 Guide-rail adapter* *The accessories illustrated or described are not in- cluded as standard delivery. Bosch Power Tools 1 609 929 N80 | (6.2.08)
A significantly reduced working period after charging indicates that the battery is used and must be replaced. 08.01.2008, Robert Bosch GmbH, Power Tools Division D-70745 Leinfelden-Echterdingen Observe the notes for disposal. 1 609 929 N80 | (6.2.08) Bosch Power Tools...
– Clean the saw blade 22 and all clamping Observe the relevant regulations in your parts to be assembled. country for the materials to be worked. – Tilt back the retracting blade guard 12 and hold firmly. Bosch Power Tools 1 609 929 N80 | (6.2.08)
Adjusting the Cutting Depth (see figure C) Inserting the Battery Adjust the cutting depth to the thickness of Use only original Bosch O-pack batteries the workpiece. Less than a full tooth of the with the voltage given on the type plate of blade teeth should be visible below the work- your machine.
Sawing with Parallel Guide (see figure D) that the side with the rubber lip faces to the The parallel guide 11 enables exact cuts along a workpiece. workpiece edge and cutting strips of the same dimension. Bosch Power Tools 1 609 929 N80 | (6.2.08)
0° 1-45° centre for Bosch power tools. – Tighten wing bolt 8 to lock the position of the In all correspondence and spare parts order, guide-rail adapter.
Page 15
Fax: +353 (01) 4 66 68 88 a highly toxic heavy metal. Australia, New Zealand and Pacific Islands Ni-MH: Nickel metal hydride Robert Bosch Australia Pty. Ltd. Do not dispose of battery packs/batteries into Power Tools household waste, fire or water. Battery...