Preferences - Kenmore Elite 796.2947 Use & Care Manual

HOW TO USE

PREFERENCES

SYSTEM SETTINGS SCREENS
Touch the Prefs icon to navigate to the GUIDES screen,
then touch the System Settings tab on the right side
of the PREFERENCES screen. This screen provides
adjustments for chime volume, screen brightness and
language. Also available is the on screen installation
guide and the Touch Screen Calibration program.
Touch the Factory Reset button to restore the control to
factory default settings.
NAVIGATION
Home
Saves all settings and returns you to the
HOME screen.
Arrows
Navigates through the available cycles
or adjusts the settings (refer to page
12).
Guides Tab
Takes you to the GUIDES screen. This
screen provides access to many
helpful guides (refer to page 25).
Chime
Brightness
Language
Install Cycle
Factory Reset
Touch Screen
Calibration
PREFERENCES SCREEN
SYSTEM SETTINGS SCREEN
26
Touch and slide the highlighted seg-
ment of the chime bar to adjust the
chime volume: Off, Soft, Loud.
Touch and slide the highlighted seg-
ment of the brightness bar to adjust
the screen brightness. The brightness
percentage is displayed at the right
end of the bar.
Touch the Language button to select
the desired on screen language:
English, Spanish or French.
Touch this button to view the on screen
installation instructions.
Touch this button to reset the control to
factory presets. This button will erase
all MyCycles and restore all defaults.
Touch this button to start the screen
calibration program if the touch area
does not match the screen response.
Follow the instructions on the screen for
adjustment. The power can not be shut
off during calibration mode.