Setup Utility; Key Operations - Panasonic CF-T1 Reference Manual

Setup Utility

Running the Setup Utility

Key Operations

1
Slide the power switch, and immediately hold down F2.
2
Release the key when the Setup Utility starts up.
If [Enter Password] is displayed, enter your password.
When a User Password is entered, some contents cannot be changed (
NOTE
G If you fail to press F2 at the right moment, the Setup Utility will not start up. In this
case, power off the computer and try again.
G To close the Setup Utility, press Esc , select the exiting method in [Exit] menu, then
press Enter .
F1
: To display the corresponding "help" file.
Esc
: To display [Exit] menu.
Ï Ð
: To move among the items.
Í Î
: To move among the menus.
F5 F6
: To move among the values.
Enter
: To display sub-menu of each item selected by Ï Ð .
F9
: To set default settings (except the password).
(When starting up the Setup Utility with the User Password, this key is not
available.)
F10
: To save the settings and exit.
NOTE
G When setting date and time, Tab can be used to move the cursor.
54
Ÿ page
19).