Touchscreen; Moving The Cursor - Panasonic CF-T1 Reference Manual

Touchscreen

<Only for models with touchscreen>
Your computer is equipped with a touchscreen display allowing you to perform the same
operations as the touch pad or mouse by touching the surface of the display with the stylus
(included). The following explanation gives one example (for the default settings).
The operation settings can be changed. (
G Moving the cursor
Cursor
G Double-clicking
Two quick
taps
CAUTION
G
When the LCD is used alone or with an external display simultaneously, the
touchscreen function cannot be used when the area of either display is set larger
than default setting of the screen resolution.
G
If a change is made to the screen resolution, or the cursor can not be pointed
correctly, be sure to perform [Calibration]. (
G
Even when only an external display is in use, the cursor will move on the external
display if the surface of the internal LCD is touched when the touchscreen driver is
active. Therefore, do not touch the LCD when only an external display is in use.
G
The touchscreen function can not be used when using the full screen in [Command
Prompt].
Ÿ page
12)
G Clicking
One tap
G Dragging
Touch and hold the object (e.g.
file or icon), move the stylus on
the surface (dragging the object
to the desired location), then re-
lease the stylus.
Ÿ page
12)
11