Sony FDR-AX40 How To Use Manual page 59

You can project images from a computer or other devices using the built-in projector.
1. Connect the PROJECTOR IN jack of this product to an HDMI output jack of the other
device using the HDMI cable (supplied).
2. Face the projector lens towards a surface, such as a wall, and then press
PROJECTOR.
3. Select [Image from External Device] on the LCD monitor.
4. Select [Project] on the LCD monitor.
This screen appears the first time you use the built-in projector after this product is
turned on.
5. Adjust the focus of the projected image using the PROJECTOR FOCUS lever.
A: PROJECTOR FOCUS lever
The further you position this product from the wall, the larger the screen will be.
It is recommended that you place this product further than 0.5 m (1.6 feet) away
(approximate distance) from the surface that the images are to be projected onto.
6. Select the image you want to view using your computer or other devices.
To turn off the projector, press PROJECTOR.
Note
You can only operate the PROJECTOR FOCUS lever while projecting images.